Bevian - 3dframing.co.uk - Bespoke & Custom Made Picture Frames

Frame Builder: Select from our range of mounts and mouldings and build your Made to Measure picture frame online

---

Our Made to Measure Picture Frames

All of our picture frames can be used for standard pieces of art work, photographs etc. by using our frame builder to order the component parts e.g. the frame, mounts, glass. All frames are automatically supplied with an mdf backboard. When you order a complete frame we include sealing tape, string and eyes.

How To Measure Art Work.

To help you measure for a custom and bespoke made to measure picture frame of any size, follow the guide below.

1. Measure the image size from top to bottom, this gives you the height. If ordering a mount with your frame deduct 4mm to give a small overlap of your art work.

2. Measure the image size from left to right as in 1, this gives you the width.

3. At stage one of the frame builder enter these measurements as picture height and width.

4. At the choose mount stage of the frame builder, choose a front mount by entering mount border sizes required and select colour required.

5. Then choose a back mount if required, by specifying amount of colour to be shown. The aperture size will automatically remain at the correct size for your print as measured in 1 & 2 above.

Tip
How to select the right mount border size?

As a general rule the wider the mount, the better the picture will look, so when framing artwork, as a starting point think of a border of approximately 50mm. On smaller pictures the border can be narrower.

Notes: -
The front mount will be covered on each outside edge by the moulding rebate, which is 6mm on most frame mouldings.

Our spacer frames are 6mm wide; if you want a 3D item to fit tight into a spacer frame this should be allowed for by adding 12mm to the height and 12mm to the width when measuring.

When manufacturing picture frames there can be a tolerance of + or – 2mm.

If you need any help please contact us.